da admin | Apr 2, 2022 | Treatments & Cycles
INDUSTRIAL OR MARINE ATMOSPHERE WITH TWO-COMPONENT SOLVENT EPOXY PAINT ON SANDBLASTED IRON – 1st protection phase: one coat of epoxy galvanizer series 365, drying for 24 hours at 20 ° C – 2nd base step: one coat of solvent epoxy primer series 364 or 370 or...
da admin | Apr 2, 2022 | Treatments & Cycles
SURFACES IN CONTACT WITH FOOD OR DRINKING WATER – 1st phase surface preparation: on mineral support clean from dirt and grease with high pressure cleaner and remove old paint, cover if holes and cracks with cement mortars or epoxy cement mortars, on metal...
da admin | Apr 2, 2022 | Treatments & Cycles
Many causes contribute to moisture stains inside the home. The main ones are: the capillarity of the bricks, the porosity of the exterior walls, infiltration due to damaged gutters or exterior artifacts, or vapor condensation in the more north-facing interior walls....
da admin | Apr 2, 2022 | Treatments & Cycles
SINCAMTRE is the specific finish with exceptional adhesion to the support with properties of consolidation and blocking of asbestos fibers, its excellent resistance to chalking determines a long conservation over time of the treated surfaces and prevents the emergence...
da admin | Apr 2, 2022 | Treatments & Cycles
TREATMENT WITH SILICONE SOLVENT PAINT ON SANDBLASTED IRON Painting of machinery, equipment and systems subject to a continuous operating temperature of 550°C – 600°C. Chimneys, ovens, stoves, hot plates, piping, etc. – 1st base phase: one coat of...
da admin | Apr 2, 2022 | Treatments & Cycles
SCUDETTO code 0101100 is applied by spray with any system that allows a convenient spraying. Mix the product thoroughly in its container, then dilute to 30-50% by volume with water. Basically, for each 15-liter pack of SCUDETTO, add 5-7.5 liters of water and...
